Placid Audio Copperphone Microphone

  • Sale
  • Regular price $260.00

The Placid Audio Copperphone Microphone is unlike any full range microphone you have heard, it operates within a limited bandwidth of frequencies which lends a nostalgic quality to the signal. Some might compare the sound of the Copperphone to an AM radio or a telephone.

The sound is achieved through a combination of the microphones element and a mechanical filtering device. The element is rear ported into a hollow resonant chamber and as sound passes through the diaphragm into the chamber, upper mid range frequencies are accentuated while low and high frequencies are reduced. The Placid Audio Copperphone does not use phantom power as it has a passive dynamic element. It uses a Switchcraft 3 pin male XLR connector and can be connected to any audio gear with a 3 pin female XLR connector via an XLR cable. Accidentally applying phantom power will not harm the microphone or affect its performance. Because the sound of the Placid Audio Copperphone has a character unlike many other traditional mics, it makes a great addition to any recording enthusiasts arsenal of microphones. It can be used as an all out obvious effect on its own or it can be paired with other traditional microphones for infinite blending possibilities.

The Placid Audio Copperphone can be used live as a specialty effects mic in conjunction with regular microphones. As with any microphone, feedback can be an issue. Results will vary depending on the application, the overall volume of your band, the quality of the sound system and the experience of the engineer running the sound system. However very careful adjustment and equalization of the Copperphone in the monitors can yield acceptable results. If you use an in ear monitor system, potential feedback problems are usually not an issue. The Placid Audio Copperphone is constructed from quality rugged materials and is likely to withstand a high degree of shock or other physical impacts. The Copperphone can also withstand extremely high sound pressure levels without damage to the diaphragm. However a high SPL is likely to overdrive the diaphragm resulting in a clipping style distortion that may be desired for some applications.

Placid Audio Copperphone Microphone Features:
  • Passive magnetic moving coil transducer
  • Tuned ported resonant chamber
  • High quality Switchcraft 3 pin XLR connector
  • Rugged copper housing and components
  • Adjustable aircraft aluminum mounting bracket to fit North American style stands (will fit European style stands with common threaded adapter)
  • Handcrafted in the U.S.A
  • Lifetime operational warranty
Placid Audio Copperphone Microphone Specifications
  • Type: Dynamic
  • Polar Pattern: Cardioid
  • Frequency Response: 200Hz 3kHz
  • Impedance: 150 ohms
  • Output: 115 +/- 2dB SPL @ 1 kHz
  • Dimensions: 2.5 inch x 6 inch
  • Weight: 1.75 lbs.

This microphone is lightly used and comes with its full page instruction manual. Please give us a call if you have any additional questions about it!